CinePlex v3 Manual - Plexon Inc

4
4 To generate occurrences for this marker based on other criteria, click
Generate based on.
5 To generate regularly-spaced marker occurrences, in the Time of First
Occurrence box type an offset from the beginning of the file.
6 To space the occurrences at intervals such that they occur at a specified rate,
in the Occurrence Rate box, type the rate in occurrences per second.
7 To specify the total number of marker occurrences to generate, in the
Number to Generate box, type the total.
Note:
Under some conditions, the New Project Wizard also displays the
Generate Marker Occurrences dialog box so that the required frame
marker occurrences can generate. The suggested values that appear
in the Occurrence Rate and Number to Generate edit boxes when
the dialog box first appears correspond to the frame rate and number
of frames detected in the currently-loaded video data file. In most
cases, simply click OK to generate appropriate frame marker occurrences.
Automatically generating Interval marker occurrences
1 To automatically generate Interval marker occurrences, in the Define New
Marker dialog box, click I, then click Generate Occurrences to open the
Generate Interval Marker Occurrences dialog box.
2 From the Generate Intervals that cover time spans drop-down list box,
select one of the following algorithms to generate the intervals:
• Between Marker 1 and Marker 2 – If this algorithm is selected, go to
Step 3.
• Around Marker 1 – If this algorithm is selected, go to Step 4.
• Between a time offset from Marker 1 and a time offset from
Marker – If this algorithm is selected, go to Step 5.
• Defined by time ranges read in from a file – If this algorithm is
selected, go to Step 6.
184 CinePlex