CinePlex v3 Manual - Plexon Inc

d
e
Measure the feature’s horizontal dimension in the units desired, and
record it for reference. The inner diameter is 30.5 cm.
Click the Adjust button in the Horizontal section. The cursor will go to the
video image and a line will appear in the color selected.
In the image above note the green line through the middle of the clock with
the box on each end. This is the sizing bar.
f
Move the sizing bar vertically so that it rests on the intersection of the
clock hands. Select one end of the sizing bar and move it to the inside
edge of the clock frame. Select the other end of the sizing bar and move it
to the inside edge of the clock frame. Right-click to record the length of
the bar in pixels.
Version 3.0 43