CinePlex v3 Manual - Plexon Inc

— Data Type: - This item contains the data type. Values are Single or
Trodal.
— Timestamp Frequency (Hz): - This item contains the frequency at
which the timestamps are created. Default is 40,000 Hz.
— A/D Frequency (Hz): - This item contains the analog-to-digital frequency.
Default is 40,000 Hz.
— Total Number of Waveforms: - This item contains the total number of
waveforms in the neural data file.
— Cont. Channels: - This item contains the number of continuous channels.
— Peak Voltage (mV): - This item contains the peak voltage of the signals
in millivolts.
— A/D Resolution (bits): - This item contains the analog-to-digital resolution
in bits. Default is 12.
— Total Number of Units: - This item contains the total number of
occurrences for all channels.
— Number of Channels with Units: - This item contains the number of
channels that have units.
— Avg Units per Active Chan: - This item contains the ratio of Total
Number of Units to Number of Channels with Units.
5.2.7 Audio Output Window
The Audio Output window is hidden by default. To open the Audio Output window,
hover the mouse over the Audio tab of the sidebar tabs at the right side of
the screen, select Audio Output from the View menu, or click the Audio Output
View button on the toolbar. The illustration below shows the Audio Output window.
5.2.7.1 Function
The Audio Output window controls CinePlex Editor’s ability to play a sound
through the computer’s audio system when Markers or neural spikes occur during
data playback.
Version 3.0 227