CinePlex v3 Manual - Plexon Inc

• File - Type an export file name and path, or click Browse and select an existing
file.
• Export invalidated spikes - Click this checkbox to export invalidated
spikes to the PLX file. Invalidated spikes appear with a unit number of 0
(unsorted).
• Marker Mapping to Event IDs - This list box controls which markers
appear in the output file and which event IDs represent them. Only Timeonly,
Frame, and Interval-type markers appear in this list box; Scalar and
Coordinates markers must be represented by strobed events. To remove individual
markers from the output PLX file, click to clear the Write? checkbox.
The user may also change the event IDs by typing a new value in the Event
ID column. There are two entries in the list box for each Interval-type marker,
one for the start time and another for the end time.
• What to Export as Strobed Events - Select one of these items to export:
— Original Strobed Events (Passthrough Mode) – Select this item to
pass unchanged the strobed event data blocks from the original neural
data file through to the output PLX file. Use this mode when if not
interested in representing any changes to any Scalar or Coordinates
marker occurrences in the output file, or if there are not any Scalar or
Coordinates data to output.
— Scalar Marker – Select this item to represent the values from a single
Scalar marker in the strobed events. Select the Scalar marker from the
list.
— Coordinate Markers – Select one of the following combinations:
– Click LED 1, LED 2, or LED 3 or any combination of these LEDs.
For each LED, select a corresponding Coordinates marker from the
drop-down list.
– To export coordinates for the centroid position, click Centroid Pos
and select a corresponding Coordinates marker from the drop-down
list.
– To include Motion Measure data, click Centroid Pos and click a
corresponding Coordinates marker from the drop-down list; then
click Motion and select a corresponding Scalar marker from the
drop-down list. For more information on the Motion Measure
option, see “Motion Measure Option” on page 81.
Note:
Select only one of the preceding combinations. If an LED is clicked,
do not click Centroid Pos. Likewise, do not click Motion without
clicking Centroid Pos.
• Export! - Click Export! to close the dialog box and write the new PLX file.
Version 3.0 243