CinePlex v3 Manual - Plexon Inc

In the above image note that the sizing bar now measures the inside diameter
of the clock’s frame.
f
Go to the slider next to the Actual item and move it so that it reads the
dimension recorded above. Studio is now calibrated to the measured distance.
In the image above note that the Actual setting has been changed to the measured
inner diameter of the clock’s frame (30.5 cm).
g
Click all three “-” signs once the adjustment is satisfactory to hide the
adjustments.
6 When two-bar has been selected:
a Click the “+” sign next to Horizontal Factor and then the “+” next to Reference
Size to expand their subsections, if needed. If they are already
shown as “-” signs, this is not needed.
Version 3.0 41