CinePlex v3 Manual - Plexon Inc

2
3 Draw the zone outline over the image corresponding to the first physical zone
of interest. For the image below a red circle was added.
4 Adjust size and shape so that the complete zone, and nothing else, is
enclosed by the outline. For the image below, the circle was adjusted to fit
around the clock by moving and adjusting the circle by the handles on the
yellow square.
5 Select a different drawing tool if needed.
Note: Remember that complex zones can be created by AND, XOR, NOT,
and NOR operations on additional shapes as they are added to the
zone.
Note:
Dynamic zones are created by clicking the Dynamic Zone icon and
selecting the color around which to draw it.
48 CinePlex