CinePlex v3 Manual - Plexon Inc

2.4 Performing an Operational Test
Before beginning the experiment, it is best to check out the equipment for proper
operation. The sections below give pointers on what to check for different equipment
configurations.
2.4.1 CinePlex Studio and a Plexon NDAQ
Set up the CinePlex Studio System as shown by the illustration below.
In this configuration the primary points to check are the camera, both monitors,
all of the connections, and all of the cables.
The primary points to check in this configuration are the camera, the monitor, all
of the connections, and all of the cables.
2.4.2 Start-Up Sequence (MAP)
The starting sequence for a MAP/CinePlex combination system is important for
correct operation of CinePlex. If not followed, video may not be visible or Cine-
Plex control by the MAP may not be possible.
Version 3.0 19