CinePlex v3 Manual - Plexon Inc

• Generate All - This button generates marker occurrences for all the level
intervals that appear in the Zone Intervals box.
• Generate Selected - This button generates marker occurrences for the
selected Level Interval marker, which is indicated by the >> in the left-most
column in the Level Intervals box.
Note:
Clicking either Generate All or Generate Selected deletes all existing marker
occurrences for the affected Zone Interval markers, and generates a new set of
occurrences according to the current Coordinates marker and conditions.
• Zone Intervals - This area lists all the defined Zone Interval markers.
— The leftmost column lists the interval number; the selected Zone Interval
marker appears with a >> in the leftmost column.
— Zone Interval Marker – This column lists the names of the Zone
Interval markers. Add or change names by typing in this field.
— Color – This column shows the colors of the zone boundaries. To
change a color, click the color to open a color selection dialog box.
— Add – This button adds a coordinate to the selected zone.
— Delete – This button deletes the selected Zone Interval marker.
• Coordinates of the Selected Zone - This area lists the coordinates of the
currently selected Zone Interval marker. The zone of a Zone Interval marker
consists of a list of 2D coordinates (X and Y) that define the closed contour.
Define these contours by clicking on the screen image (see Add that follows),
or by individually adding and typing in the coordinate values in the columns.
— The leftmost column lists the coordinate number; the selected coordinate
appears with a >> in the leftmost column.
— X – This column contains the X coordinate distance from the lower left
corner (zero distance).
— Y – This column contains the Y coordinate distance from the lower left
corner (zero distance).
— Clear - This button completely clears all points from the current zone.
Click Add to re-enter the zone.
— Add - This button puts the Zones Editor into the click-to-add mode.
The first left-click in the main window defines the first point in the contour,
subsequent left-clicks continue to define the contour. A right-click
ends the drawing and closes the contour.
— Edit - This button enables the currently selected point to be re-positioned.
After clicking Edit, move the mouse pointer to the desired location
on the main window. The contour continually re-adjusts as the
mouse pointer moves. Left-click to select the new position, or rightclick
to cancel the operation and revert to the previous position.
Version 3.0 257