CinePlex v3 Manual - Plexon Inc

— Name - this value depends on what the given line represents - an event
or an combination event. For an event, the Name setting will either be
N/A, the zone name if the Target setting is Zone, the sequence name if
the Target setting is Sequence, or 0.0 for Target settings of Speed and
Head Direction. For an combination event, the Name setting will be
N/A.
• Object - this value will be the Available Objects setting from the Event
pane.
• Output - this value indicates output line number, if any output lines are used
• Count - this value represents how many time the event has occurred.
• Time, s - this statistic has two values; Last and Cumulative. The Last value
is the duration in seconds the last time the event occurred. The Cumulative
value is the total duration in seconds of every occurrence of the event.
• Track Length, pixel - this statistic has two values; Last and Cumulative.
The Last value is the length of the track in pixels the last time the event
occurred. The Cumulative value is the total length in pixels of all the tracks
of the event.
3.2.6 Status Bar
The status bar at the bottom of the screen shows the capture file information,
remote line status, the camera frame rate, and camera noise figures. Descriptions
of the status bar items follows.
3.2.6.1 Capture Information
The information that appears in the status bar depends on state of the video
recorder. If CinePlex Studio is armed, the status bar flashes yellow and displays
the name of the video AVI file to create for the video that will be captured.
When CinePlex Studio records, the status bar turns green and displays the name
of the video AVI file, the time recorded thus far, and the time remaining.
If recording is paused, the status bar flashes green.
3.2.6.2 Status Information
The right end of the status bar contains the following status information:
Version 3.0 149