CinePlex v3 Manual - Plexon Inc

corner of the image. If the video resolution is other than 1024x768, which is usually
the case, the coordinates are linearly mapped onto the video.
To use the Zones Editor
1 On the Tools menu, click Zones Editor.
The Zones Editor window opens.
2 To define a new Zone Interval marker, under the Zone Intervals area click
Add.
The Define New Marker dialog box (see “Define New Marker” on
page 245) opens to enable the user to customize the general properties of
the new Zone Interval marker.
3 Define the new marker and click OK to close the Define New Marker dialog
box.
A new row appears in the Zone Intervals box.
Note:
Immediately after the user creates a new Zone Interval marker,
Zones Editor enables the user to click in the video window to set the
X and Y Coordinates of the Selected Zone. The box directly above
the video then contains this text:
Left-Click on the view to add a new coordinate; Right-Click to end
Version 3.0 189