CinePlex v3 Manual - Plexon Inc

3.6.3 Source Settings
The Source settings are different depending on whether Studio is in offline mode
or not.
Note:
The image on the left (Camera mode) has a Camera section (AVT Stingray)
and the image on the right (File mode) has a File section.
3.6.4 Dynamic and Static Data
Dynamic and static data may be extracted from an AVI file and used. To do this a
file must be loaded using the Browse Folder icon in the File Name setting of the
File section of a Source tab. Then use the Extractor to extract the desired data.
See “Using the Extractor” on page 115 for more details.
3.6.5 Arenas, Zones, Sequences, Combination Events, and Re-recording
After a CinePlex version 3 file has been loaded, the arenas, zones, sequences, and
combination events in the file may be edited using the procedures given in Chapter
2, and then the file may be re-recorded.
WARNING
The color of an object is changed when it moves into the area covered
by the background of an inserted file name and/or time stamp.
This will result in tracking problems in that area when doing file mode
tracking.
Version 3.0 159