CinePlex v3 Manual - Plexon Inc

2
7 To have CinePlex Studio recognize the standard red, green, and blue colors,
ensure the Pure Colors checkbox is checked.
If Pure Colors is not selected, the color desired can be selected by clicking in
the color display and positioning the cursor over a pixel of the desired color.
CinePlex Studio changes the mouse cursor to cross hairs and a magnified
view of the screen pixels appears in a window on the image.
Position the cross hair over a colored pixel that best represents the color of
the LED to track. Click the left mouse button to set the color. Repeat this step
for each color to track. Also see “Setting the Threshold” on page 87.
2.9.5.1 Using the Color Pick-up Tool
To adjust Color 1, Color 2, or Color 3 in the LED Tracker or Reflective Colors
Tracker modes, follow the procedure below.
1 To use the color pick-up tool, click on the Color Selection box whose color to
adjust. The image below shows a sample video window before clicking the
Color Selection box.
84 CinePlex