CinePlex v3 Manual - Plexon Inc

• Which Markers - The default value is Selected Marker only. Selecting All
Markers causes the occurrences for all markers to be exported, which usually
results in a confusing output file; in general, Plexon does not recommend this
option.
• What to Export for Each Marker Occurrence - The selections in this
area determine which columns appear for each marker occurrence (row). The
available columns always appear in a fixed order; clearing a checkbox
removes the column. The available items for export are:
— Marker Name (N/A for Matlab) – This item includes the textual
name of the marker in the exported file. The marker name is generally
useful only when selecting All Markers to export, otherwise the
marker name is the same for all marker occurrences when selecting
Selected Marker only to export. Because the data is output to MATLAB
as a two-dimensional array of doubles, this option is unavailable for the
MATLAB format.
— Marker Type (Number 1-7) – This item exports a number that indicates
the type of the marker, as indicated in the following table:
1 Time-only
2 Frame
3 Interval
4 Scalar
5 Coordinates
6 Level Interval
7 Zone Interval
Note:
For a complete explanation of the marker types, see “Table 5-1” on
page 5-278.
Note:
— Marker Event ID – This item exports the Event ID associated with
this marker; for more information, see Event IDs on page 5-246.
— Marker Event ID 2 - This item exports the second Event ID associated
with this marker. This item applies only if the marker is an Interval,
Level Interval, or Zone Interval type.
— TimeStamp - This item exports the time of the marker occurrence. For
Interval-type events, this is the start time.
The user may export timestamps in units of seconds or in raw clock ticks; see
“Export TimeStamps in units of”, which follows in this list.
Version 3.0 241