CinePlex v3 Manual - Plexon Inc

settings and use the file mode to determine a minimum acceptable
image quality setting for the use.
HINT
Reducing blurs and color streaks in the video
If the experimental subject moves quickly, blurs and color streaks
can appear in the video. Reduce or eliminate these problems by
increasing the shutter speed. For more information, see “Shutter”
under “Source Tab(s)” on page 122.
6 From the CinePlex Studio DVR tool bar, click the Arm button. A yellow
flashing cassette icon appears on the status bar.
7 At Sort Client, click Data File, then click Options. On the Start and Stop tab,
click the CinePlex Sync check box, then click the Use User Commands
radio button. Select and set Start and File Name Options as desired in the
Options for User Command Start section.
8 From the Sort Client toolbar, click the icon to start recording. If a file name has
not been selected, enter it.
Sort Client starts recording and displays status information about the neural
data file on the Sort Client status bar; for information on the Sort Client status,
see the RASPUTIN User’s Guide.
CinePlex Studio starts recording and displays information about the video file
in the CinePlex Studio status bar.
Note:
Note:
The Studio status bar will display the amount of free space remaining
on the drive selected. The file can grow to fill the space available.
For more information about recording files using Sort Client, refer to
the Plexon RASPUTIN User’s Guide; see “Using Sort Client, Section
C, Record.”
9 To pause recording, from the Sort Client Datafile menu, click the Pause
Recording icon.
Sort Client pauses recording and displays status information about the neural
data file on the Sort Client status bar; for information on the Sort Client status,
see the RASPUTIN User’s Guide.
CinePlex Studio pauses recording and displays information about the video
file in the CinePlex Studio status bar. The status bar flashes green and gray to
indicate that the recording is paused.
To resume recording, click Pause Recording again.
10 To stop recording, from the Sort Client Datafile menu, click Stop Recording
or the Stop icon.
Sort Client stops recording to the neural data file, clears the recording information
from the status bar, and saves the file to the location specified in
Step 8.
Version 3.0 63