CinePlex v3 Manual - Plexon Inc

5
– Abv/Blw – This column contains the Above or Below indicator for
the second level, which only applies if N/A is not selected.
– Level 2 – This column contains the numerical value for the second
level, which only applies if N/A is not selected. Type a numerical
value in this field or click and drag horizontal line 2 on the graph.
• Add - This button opens the Define New Marker dialog box to add a new
Level Interval marker.
• Delete - This button deletes the selected interval level.
• Center Lev1 and Center Lev2 - By default, CinePlex Editor sets the level
intervals to the middle of the display range shown in the graph, which it determines
from the range of scalar values encountered for the selected Scalar
marker. Click these buttons to re-position the corresponding level line to the
center of the view again.
• Done - Click Done to close the editor. CinePlex Editor stores the conditions
with the Level Interval marker and displays them when the Levels Editor reopens.
5.3.7.2 Zones Editor
This item opens the Zones Editor window. An illustration of the dialog box follows:
• Coordinates Marker To Use - This box lists the Coordinates marker used
to define the zone.
256 CinePlex