CinePlex v3 Manual - Plexon Inc

3
3.2.1.6 Color Markers Tracker Pane
The following illustration shows the Settings window for Reflective Colors
mode:
3.2.1.6.1 Reflective Colors Tracker Group. From the Tracker menu, selecting
Reflective Colors displays this area. It contains the following controls:
• Pure Colors – Checking this item forces tracking of pure R, B, and B colors.
When checked colors 1-3 will be set to R, G, and B respectively and cannot be
changed.
• Min Object Size – This setting determines the minimum area (in pixels) for a
blob to be identified it as an object. The range for the Min Object Size control
is 1 to 10,000.
• Filter Details – Checking this item erodes a 1 pixel layer from the objects.
This helps avoid parasite objects.
Note:
Object Contour mode has a checkbox called Detail Filter which will erode a
layer of pixels (with a thickness of more than 1) from the object.
• Marker1, Marker2, Marker3, Marker4, Marker5 – These controls enable
color tracking and color selection for up to five colors. If Pure Color is not
checked, clicking in a color bar allows dragging the cursor to the desired pixel
color in the image. Left-click selects the color; right-click exits color selection
mode.
134 CinePlex