CinePlex v3 Manual - Plexon Inc

• Mrk1Threshold, Mrk2Threshold, Mrk3Threshold, Mrk4Threshold,
Mrk5Threshold – These controls allow the user to set the threshold level for
their respective colors. These controls are normally hidden until their respective
Marker checkboxes are checked. The range for the Threshold Color controls
is 0 to 255.
Each Marker control can be expanded by clicking on the “+” (plus) sign to the
left. This allows selecting different visualization colors for the marked track, center
of gravity symbol, contour boundary, and fill color.
Each marker control has a PLX button to the right. Pushing this button causes the
coordinates to the sent to the MAP for inclusion in the PLX file. Only three of the
PLX buttons can be active simultaneously.
3.2.1.6.2 Visualization Group. The Visualization group is common to all
tracker modes. It is visible only after one of the tracking modes is selected.
It contains the following settings:
• Track – Checking this item shows the animal’s trajectory and color selection.
• Track Portion – This allows the user to show the whole trajectory or the last
“Point Count” points.
• Points to Show – This setting (from 30 to 300) indicates how many points to
show in the trajectory when Track Portion is selected.
• Track Transparency – This setting determines the transparency of the trajectory
layer. The range of the Track Transparency control is 0.0 (opaque) to
1.0 (transparent).
• Tracking Window – Checking this item shows the tracking window.
• Center of Gravity – Checking this item shows the center of gravity.
Version 3.0 135