Banner Faculty and Advisor Self-Service / User Guide / 8.3

Crosswalk Validation Form (GTVSDAX) records descriptions
Field
WEBCURR
(WebCAPP Curriculum
Source)
Description
The sequence number is 1,2, 3, or 4.
WEBCURR is a hierarchy of values from which the current
curriculum record is pulled. The valid values that can be
entered in the external code are the following:
DEG — Degree Record (SHADEGR)
GST — General Student Record (SGASTDN)
ADM — Applicant Record (SAAADMS)
REC — Prospect Information Form (SRARECR)
The sequence number associated with the external code
determines what record appears on the Current Curriculum
page (bwckcapp.P_DispCurrent).
For example, if DEG is sequence 1, and the student does not
have a Degree record, the system looks for sequence 2. If the
record does not exist for that sequence it will go on to the
next sequence number. If no record is found, the message No
Curriculum Record Found is displayed.
These four records must have a value. If only one record is
desired, for example, DEG, either enter DEG for all four
records, or enter some other unknown value (other than
DEG, GST, ADM, or REC), such as 123.
Pipe Initialization Process (SFRPINI)
To process compliance evaluations from the Web, you must run the Pipe Initialization
Process (SFRPINI).
Oracle Database Pipes
When using WebCAPP, Oracle database pipes are used to submit compliance requests
from the various registration processes. The following pipe programs are involved.
• The Pipe Initialization Process (SFRPINI.PC) initializes the Pipe Process for each
pipe listed in the database Pipe (SFBPIPE) table.
• The Pipe Process (SFRPIPE.PC) is used as a listening agent for Oracle pipes to
initiate the compliance process and to perform compliance evaluations from selfservice.
December 2009 Banner Faculty and Advisor Self-Service 8.3 7-71
User Guide
Student Information