STANDARD HANDBOOK OF PETROLEUM & NATURAL GAS ...

Hoisting System 537
Table 4-6
(continued)
Tubing Non-Umt Tubing External Upaet Tubing
' 'D" ' "W"
"TB" "Bg" .' "W "D." 'TB" "BB"
Size O.D. Collar Din. Top Bore Bottom Bore Collar Din. Upset Dia Top Bore Bottom Bore
+ 1/32 +.I9 +1/32 +.I9
+1p 2.40 mm -1/64 4 0 *1!64 f.40 mm-1(64 -.40
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
1.050 86.67 1.313 33.85 1.126 28.58 1.126 48.58 1.680 42.16 1.316 35.40 1.422 36.12 1.41 36.12
1.316 33.10 1.660 b2.16 1.390 35.31 1.390 85.31 1.900 43.26 1.489 37.31 1.678 40,08 1.578 40.08
1.660 &?,I6 2.064 54.17 1.734 bb.01 1.731 1b.04 2.200 55.88 1.812 16.02 1.9'22 b8,84 1.922 48.82
1.900 18.46 2.200 65.88 1.984 60.39 1.984 50.39 2.500 63.50 2.093 55.70 2.203 56.03 2.209 56.03
2% 60.32 2.876 73.08 2.463 62.31 2,463 68.31 S.063 77.80 2693 65.89 2.703 68.58 2.703 68.58
75.03 3.500 88.90 2.965 75.01 2.963 75.01 3.666 93.17 3.093 78,56 3.203 81.36 3.203 81.36
2' 88.90 4.260 107,95 3.678 90.88 3.678 90.88 4.500 llb.30 3.760 96.25 3.859 98.02 3.869 98,OP
:% 101.60 4.760 120.65 4.078 1W,58 4.078 109.58 6.OOO 127.00 4.260 101.95 4.369 110.74 4.369 110.7b
4% 111.30 5.200 134.08 4.693 118.69 4.693 116.69 6.683 IbI.30 4.750 180965 4.859 I23.4b 4.869 129.4.4
CAUTION DO NOTUSE EXTERNAL UPSETTUBING ELEVATOFSON NON-UPSETTUBING.
NOTE:Bm"lf~"i.opCioldmnne~~dowthawo~~
The permissible tolerance on the outside diameter immediately behind the
tubing upset may cause problems with slip-type elevators.
Rotary Swivels
Rotary Swivel Pressure Testing. The assembled pilot model of rotary swivels
shall be statically pressure tested. All cast members in the rotary swivel hydraulic
circuit shall be pressure tested in production. This test pressure shall be shown
on the cast member.
The test pressure shall be twice the working pressure up to 5,000 psi (incl.).
For working pressures above 5,000 psi, the test pressure shall be one and onehalf
times the working pressure.
Swivel Gooseneck Connection. The angle between the gooseneck centerline
and vertical shall be 15'. The swivel gooseneck connections shall be 2, 2+, 3,
33, 4, or sin. nominal line pipe size as specified on the purchase order (see
Figure 4-13). Threads on the gooseneck connection shall be internal line pipe
threads conforming to API Standard 5B "Threading, Gaging, and Thread Inspection
of Casing, Tubing, and Line Pipe Threads." Rotary swivel gooseneck connections
shall be marked with the size and type of thread, such as 3 API LP THD.
Rotary Hose Safety Chaln Attachment. Swivels with gooseneck connections
in 2 in. or larger shall have a suitable lug containing a 13411. hole to accommodate
the clevis of a chain having a breaking strength of 16,000 lb. The
location of the lug is the choice of the manufacturer.