18.11.2014 Views

STANDARD HANDBOOK OF PETROLEUM & NATURAL GAS ...

STANDARD HANDBOOK OF PETROLEUM & NATURAL GAS ...

STANDARD HANDBOOK OF PETROLEUM & NATURAL GAS ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 4-24<br />

Wire Diameter Tolerance [12]<br />

Hoisting System 577<br />

Wnr Dimwas<br />

Galvanizal<br />

wires<br />

inches mm k k S mm inches mm<br />

0.01 8 - 0.027 0.46 - 0.69 0.00 1 5 0.038 - -<br />

O.Cn8 - 0.059 0.70 - 150 O.Oo20 0.05 1 0.0035 0.089<br />

0.060 - 0.092 1.51 - 2.34 0.m 0.064 0.0042 0.114<br />

0.093 - 0.141 2.35 - 358 0.0030 0.076 0.0055 0.140<br />

0.142 ad larger 3.59 md larger 0.0035 0.075 0.0075 0.190<br />

Lengths. Length of wire rope shall be specified by the purchaser. If minimum<br />

length is critical to the application, it shall be specified and conform to the<br />

following tolerances.<br />

1300 ft (400 m): -0 to +5%<br />

y 1300 ft (400 m): Original tolerance<br />

+ 66 ft (20 m) per each additional 3280 ft (1000 m) or part thereof.<br />

If minimum is not critical to the application, it shall conform to the following<br />

tolerances.<br />

1300 ft (400 m): f2.5%<br />

1300 ft (400 m): Original tolerance<br />

rt 33 ft (10 m) per each additional 3280 ft (1000 m) or part thereof.<br />

Lubrication. All wire rope, unless otherwise specified, shall be lubricated and<br />

impregnated in the manufacturing process with a suitable compound for the<br />

application in amounts best adapted to individual territories. This lubricant<br />

should thoroughly protect the ropes internally and externally to minimize rust<br />

or corrosion until the rope is put in service.<br />

Mooring Wire Rope<br />

Mooring wire rope is used as anchor lines in spread mooring systems, and<br />

shall comply with the all the provisions of Wire Rope.<br />

Wire rope for this use should be one operation, right lay, regular lay,<br />

independent wire rope core, preformed, galvanized or bright. The nominal<br />

strength of galvanized and bright mooring wire rope shall be as specified in<br />

Table 4-25. For bright mooring wire ropes, the wire grade shall comply with<br />

the requirements for Extra Improved Plow Steel, Table 4.2.8 or IS0 Std 2232*<br />

value of 1770 N/mms.<br />

*International Organization for Standardization, Standard '2232-1973, "Drawn Wire for General<br />

Purpose Non-Alloy Steel Wire Ropes-Specifications," available from American National Standards<br />

Institute, 1430 Broadway, New York, New York 10018.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!