01.12.2014 Views

Directive 065: Resources Applications for Oil and Gas Reservoirs ...

Directive 065: Resources Applications for Oil and Gas Reservoirs ...

Directive 065: Resources Applications for Oil and Gas Reservoirs ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Requirements<br />

4) If there are per<strong>for</strong>ations above 600 m KB,<br />

identification of the base of groundwater<br />

protection (BGWP) (mKB).<br />

5) a) Identification of the source (intervals),<br />

composition, <strong>and</strong> volumes of the water,<br />

<strong>and</strong><br />

b) a discussion of how anticipated water<br />

production was estimated or how<br />

produced water was measured or<br />

estimated.<br />

6) If the applicant is proposing to produce nonsaline<br />

water, the number of the water<br />

diversion permit that has been obtained from<br />

Alberta Environment.<br />

7) A figure showing the water-bearing<br />

interval(s) in relation to all per<strong>for</strong>ations<br />

within 25 m of the water-bearing interval or<br />

the shallowest productive per<strong>for</strong>ated<br />

interval.<br />

8) A copy of the results of a water well test<br />

analysis if conducted; if not conducted, an<br />

explanation of why a test was not<br />

conducted.<br />

Comments<br />

The BGWP may be obtained from the data<br />

provided in ERCB ST55-2007: Alberta’s<br />

Base of Groundwater Protection (BGWP)<br />

In<strong>for</strong>mation or from your own analysis. If<br />

you have completed your own analysis, you<br />

must include the geological <strong>and</strong>/or technical<br />

in<strong>for</strong>mation to support your pick of the<br />

BGWP in the application.<br />

You must conduct sampling <strong>and</strong> analysis of<br />

the water in accordance with <strong>Directive</strong> 044.<br />

Well licensees are responsible <strong>for</strong> ensuring<br />

that the volume of water produced from a<br />

well is measured accurately.<br />

The Water Act prohibits the production on<br />

non-saline water unless such production is<br />

approved by a water diversion permit<br />

obtained from Alberta Environment.<br />

You must evaluate whether there are water<br />

wells within the 600 m radius <strong>and</strong> 25 m depth<br />

<strong>for</strong> all wells in the pools proposed <strong>for</strong><br />

commingling, even if the application itself is<br />

<strong>for</strong> a single well, as the ERCB will consider<br />

approving commingling on a pool rather than<br />

well basis only in exceptional circumstances<br />

as required by Section 3.050 of the OGCR.<br />

If you offered to test the water well but the<br />

owner of the water well rejected the offer, a<br />

statement should be made in the application<br />

to this effect.<br />

9) A copy of the fluid analysis <strong>for</strong> each pool<br />

<strong>and</strong> coal <strong>and</strong> shale zone proposed <strong>for</strong><br />

commingling.<br />

10) Confirmation that the infrastructure to<br />

produce <strong>and</strong> transport the reservoir fluid is<br />

appropriate <strong>for</strong> the commingled production<br />

stream.<br />

ERCB <strong>Directive</strong> <strong>065</strong>: <strong>Resources</strong> <strong>Applications</strong> / Commingled Production (October 2011) • 3-25

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!