Directive 065: Resources Applications for Oil and Gas Reservoirs ...

• 1 Legal Subdivision
• 2 Legal Subdivisions
• 1 Quarter Section
• 1 Half Section
• 1 Section
• 2 Section
• 3 Section
• 4 Section
• Per Holding
• Limited by Buffer Distance
• Limited by Buffer and Interwell Distances
• Limited by Interwell Distance
• Per Pool
• See Special Provision
7) Enter the buffer zone distance of the holding(s) being modified.
Enter the requested buffer zone distance from the boundaries of each holding in metres. The
buffer zone distance entered must match the existing approval or be the standard buffer zone for
the area. Applications requesting non-standard buffer zones that are not currently approved for
the area of application will not be accepted using the modify application form and will be closed.
7a) Enter the buffer orientation of the holdings being modified.
Select the boundaries of the holding that the requested buffer zone distance will apply to. The
selected boundaries must match the existing approval or be the standard buffer zone orientation
for the area.
8) Are you requesting an interwell distance for the holding(s) being modified?
If you select YES, enter the interwell distance in question 4a.
If No, question 4a is not required.
8a) If YES, enter the interwell distance of the holding(s) being modified.
A-58 • ERCB Directive 065: Resources Applications / Appendix I: EAS Well Spacing Application Forms (October 2011)