Directive 065: Resources Applications for Oil and Gas Reservoirs ...
Directive 065: Resources Applications for Oil and Gas Reservoirs ...
Directive 065: Resources Applications for Oil and Gas Reservoirs ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7) Are there outst<strong>and</strong>ing concerns from well licensees? If yes, the Licensee Concerns<br />
attachment must be submitted as part of the application, in accordance with <strong>Directive</strong><br />
<strong>065</strong>.<br />
YES means that there are unresolved concerns or objections from one or more of the well<br />
licensees that were notified of the application. The in<strong>for</strong>mation required in a Licensee<br />
Concerns attachment is identified in Section 2.1.3.3(C) of this directive.<br />
NO means that there are no known unresolved well licensee concerns from any of the well<br />
licensees that were notified of the application.<br />
Proposed Injection Well Locations <strong>and</strong> Injection Intervals<br />
This section must only be completed <strong>for</strong> new ER schemes <strong>and</strong> amendment types requesting to<br />
add injection well location(s).<br />
8) An ER scheme application cannot be submitted unless the proposed injection wells have<br />
been drilled.<br />
Have the proposed injection wells been drilled?<br />
YES means that all the proposed injection wells have been drilled.<br />
NO means that all the proposed injection wells have not been drilled. The ERCB is not<br />
prepared to accept an ER application when the proposed injectors are not drilled because of<br />
the potential this creates <strong>for</strong> changes to the scheme details (commencement of injection date,<br />
bottomhole location of injector, <strong>and</strong> the unconfirmed presence <strong>and</strong> quality of the reservoir).<br />
9) An ER scheme application cannot be submitted unless the source of the proposed<br />
injection fluid has been secured.<br />
Has the source of the proposed injection fluid been secured?<br />
YES means that the supply of injection fluid is secured <strong>and</strong> will be available <strong>for</strong> use by the<br />
proposed injection date.<br />
If nonsaline water is to be used <strong>for</strong> injection, you must have a valid water diversion permit<br />
from Alberta Environment. The water diversion permit number must be provided in the<br />
Application attachment.<br />
NO means that the injection fluid source has not been secured. The ERCB is not prepared to<br />
accept an ER application when the injection fluid has not been secured because of the<br />
potential <strong>for</strong> delays in the commencement of injection.<br />
10) Provide the following <strong>for</strong> the proposed injection well locations:<br />
Well Licence Number: The well licence number issued by the ERCB <strong>for</strong> the proposed<br />
injection well.<br />
Unique Well Identifier (UWI): The UWI (LE/LSD-SEC-TWP-RGEWMER/ES) associated<br />
with the Well Licence Number. The full unique well identifier is listed in the approval; it is<br />
2-10 • ERCB <strong>Directive</strong> <strong>065</strong>: <strong>Resources</strong> <strong>Applications</strong> / Enhanced Recovery Scheme (October 2011)
Change language