Directive 065: Resources Applications for Oil and Gas Reservoirs ...

Requirements
5) A map showing the location of the subject
pool, processing plant, any alternative
facilities, and your production facilities.
Comments
6) A statement specifying the operator and
ownership of the processing plant.
7) A discussion of
a) the total processing capacity of the plant,
b) the volumes of gas from the pool or
pools to be subject to the proposed
common processor declaration and from
other pools currently processed at the
subject plant, and
c) the processing capacity available to you
in the plant.
8) An analysis of the composition of the gas to
be processed under the common processor
declaration, together with a discussion as to
the capability of the plant to process the
subject gas.
9) Your geological interpretation of the pool
involved, including
a) a net pay isopach map of the pool,
including both oil and gas if there is an
associated pool,
The net pay map should show the entire pool
and illustrate wells outside the pool that
control the edges of the pool.
b) where pool delineation or fluid interfaces
are based on structural interpretation, a
structure contour map of the pool and
offsetting area,
c) an interpreted and annotated log crosssection
or representative well log(s)
showing
i) stratigraphic interpretation of the
zone(s) of interest,
ii) interpretation of the fluid interfaces
present,
If there is a dispute among the parties
involved regarding the delineation of the
pool(s) in question, you should include an
annotated cross-section in the application; if
there is no dispute respecting this issue, an
annotated representative well log is
sufficient.
iii) completions and treatments to the
1-24 • ERCB Directive 065: Resources Applications / Common Processor (October 2011)