Blackmagic ATEM Manual - Concept Music Art

More documents

Recommendations

Info

108 Blackmagic UltraScope 7. Picture Display The Picture Display is a handy confidence monitor so you can see the video that is being received by Blackmagic UltraScope. The Picture Display has three settings: COLOR, B/W (black & white) and BLUE (Blue Only). Set to COLOR or B/W depending on the needs of your facility. Black & white is popular for use in colorcorrection studios so clients don’t get confused when seeing multiple color displays, and not understanding which color display is the correct, color-calibrated display. You may wish to select B/W so there is only a single, calibrated, color display in the room. The black & white display can also provide a useful visual reference. Blue Only is used with color bar test signals for setting hue on playback decks. When adjusting hue, make sure all the blue bars are a constant brightness to attain the correct hue level. Blue Only can also be used for evaluating noise levels in cameras and telecines. Blue has the least amount of signal level, in a color video signal, and so is more susceptible to noise. The BLUE setting can provide a good way to check on noise levels in a video signal. The SDI and OPTICAL buttons are not used with ATEM Production Switchers which always use whatever video and audio is routed to Aux 1. These buttons are used with the dedicated Blackmagic UltraScope hardware which includes both SDI and optical fiber SDI connections. The Picture Display will also decode RP-188 HD and VITC SD timecode information, from the SDI video input signal, and display it on the right side of the display. If the timecode information is incorrect, check your deck to ensure it is outputting the correct timecode signal encoded as VITC or RP188. It is worth noting that some standard definition broadcast decks let you “re-stripe” the timecode track independently of the VITC, which was encoded as part of the image. This meant the VITC could not be changed without copying the video down another generation. Consequently some standard definition decks had different timecode in the VITC to the normal LTC track on the SDI video output. It is always worth checking master tapes if you think the displayed timecode is incorrect. Lastly, the video standard is displayed on the left side of the Picture Display, so you can verify the video standard, and confirm you’re monitoring the correct video feed.
109 Help Getting Help The fastest way to obtain help is to go to the Blackmagic Design online support pages and check the latest support material available for your ATEM switcher. Blackmagic Design online support pages The latest manual, software and support notes can be found at the Blackmagic Support Center at www.blackmagic-design.com/support. Contacting Blackmagic Design support If you can't find the help you need in our support material, please use the "Send request" button, on the support page for your ATEM switcher model, to email a support request. Alternatively call your nearest Blackmagic Design support office at www.blackmagic-design.com/company. Checking the version currently installed To check which version of ATEM software is installed on your computer, open the About ATEM Software Control window. • On Mac OS X, open ATEM Software Control from the Applications folder. Select About ATEM Software Control from the application menu to reveal the version number. • On Windows 7, open ATEM Software Control from your Start menu. Click on the Help menu and select About ATEM Software Control to reveal the version number. How to get the latest updates After checking the version of ATEM software installed on your computer, please visit the Blackmagic Support Center at www.blackmagic-design.com/support to check for the latest updates. While it is usually a good idea to run the latest updates, it is a wise practice to avoid updating any software if you are in the middle of an important project.
Page 1 and 2:
Installation and Operation Manual A
Page 3 and 4:
Contents ATEM Production Switchers
Page 5 and 6:
5 Getting Started Introducing ATEM
Page 7 and 8:
7 Getting Started Another great adv
Page 9 and 10:
9 Getting Started Plugging in Multi
Page 11 and 12:
11 Getting Started Installing Black
Page 13 and 14:
13 Getting Started Plugging in your
Page 15 and 16:
15 Getting Started Plugging in Came
Page 17 and 18:
17 Getting Started ATEM Setup Utili
Page 19 and 20:
19 Getting Started Change Network S
Page 21 and 22:
21 Getting Started GPI and Tally In
Page 23 and 24:
23 Updating the Software How to upd
Page 25 and 26:
25 Connecting Video Outputs There a
Page 27 and 28:
27 Using ATEM Software Control Inte
Page 29 and 30:
29 Using ATEM Software Control Swit
Page 31 and 32:
31 Using ATEM Software Control Fade
Page 33 and 34:
33 Using ATEM Software Control Medi
Page 35 and 36:
35 Using ATEM Software Control ATEM
Page 37 and 38:
37 Using ATEM Software Control Sett
Page 39 and 40:
39 Using ATEM Software Control Cust
Page 41 and 42:
KEY 1 KEY 2 KEY 3 KEY 4 4 5 6 LUMA
Page 43 and 44:
1 2 3 4 5 6 43 7 8 9 Using the ATEM
Page 45 and 46:
45 Operating Your ATEM Switcher Int
Page 47 and 48:
47 Operating Your ATEM Switcher Cut
Page 49 and 50:
49 Operating Your ATEM Switcher Aut
Page 51 and 52:
51 Operating Your ATEM Switcher To
Page 53 and 54:
53 Operating Your ATEM Switcher Tra
Page 55 and 56:
55 Operating Your ATEM Switcher Wip
Page 57 and 58: 57 Operating Your ATEM Switcher To
Page 59 and 60: 59 Operating Your ATEM Switcher The
Page 61 and 62: 61 Operating Your ATEM Switcher Sha
Page 63 and 64: 63 Operating Your ATEM Switcher Sof
Page 65 and 66: 65 Operating Your ATEM Switcher Man
Page 67 and 68: 67 Operating Your ATEM Switcher Key
Page 69 and 70: 69 Operating Your ATEM Switcher Bac
Page 71 and 72: 71 Operating Your ATEM Switcher Ups
Page 73 and 74: 73 Operating Your ATEM Switcher Chr
Page 75 and 76: 75 Operating Your ATEM Switcher Adj
Page 77 and 78: 77 Operating Your ATEM Switcher Adj
Page 79 and 80: 79 Operating Your ATEM Switcher Add
Page 81 and 82: 81 Operating Your ATEM Switcher Key
Page 83 and 84: 83 Operating Your ATEM Switcher Usi
Page 85 and 86: 85 Operating Your ATEM Switcher Usi
Page 87 and 88: 87 Operating Your ATEM Switcher Med
Page 89 and 90: 89 Blackmagic Media Express What is
Page 91 and 92: 91 Blackmagic Media Express Media L
Page 93 and 94: 93 Blackmagic Media Express Media L
Page 95 and 96: 95 Blackmagic Media Express Browsin
Page 97 and 98: 97 Blackmagic UltraScope What is Bl
Page 99 and 100: 99 Blackmagic UltraScope Full Scree
Page 101 and 102: 101 Blackmagic UltraScope Color Cor
Page 103 and 104: 103 Blackmagic UltraScope 3. Vector
Page 105 and 106: 105 Blackmagic UltraScope From the
Page 107: 107 Blackmagic UltraScope 6. Audio
Page 111 and 112: 111 Help Which notebooks can I use
show all

Blackmagic ATEM Manual - Concept Music Art

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?