Blackmagic ATEM Manual - Concept Music Art
Blackmagic ATEM Manual - Concept Music Art
Blackmagic ATEM Manual - Concept Music Art
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
53<br />
Operating Your <strong>ATEM</strong> Switcher<br />
Transition<br />
Mix Dip FTB<br />
1:00 1:00 1:00<br />
Set Rate Set Rate Set Rate<br />
To perform a mix transition on the broadcast panel<br />
Step 1. On the preview bus, select the video source that you want on the program output.<br />
Step 2. Press the MIX/DIP button to select the mix transition type. The system control automatically<br />
navigates to the transition menu. To manually navigate to the transition menu press HOME ><br />
TRANS.<br />
Step 3. In the transition menu, use the knob to adjust the mix rate. The transition rate display in the<br />
transition control block will update dynamically. You can also enter a rate duration using the<br />
number pad followed by the set rate button.<br />
Step 4. Perform the transition as an auto transition or manual transition from the transition control block.<br />
Mix Transition Parameters<br />
Mix<br />
The mix transition rate in seconds : frames.<br />
Dip Transitions<br />
A DIP is similar to a mix in that it is a gradual transition that transitions from one source to another. However,<br />
a dip transition gradually mixes through a third source, the dip source. For example, the dip transition<br />
can be used for a transition that calls for a white flash or a transition that quickly flashes the sponsor logo.<br />
The length of the dip transition and the dip source can both be customized.<br />
Program output for a dip transition.