Blackmagic ATEM Manual - Concept Music Art
Blackmagic ATEM Manual - Concept Music Art
Blackmagic ATEM Manual - Concept Music Art
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
87<br />
Operating Your <strong>ATEM</strong> Switcher<br />
Media Player 1 Key<br />
Media Player 2<br />
Media Player 2 Key<br />
Program<br />
Preview<br />
Clean Feed 1<br />
Clean Feed 2<br />
This is the key output from media player 1, and is derived from the still or clips alpha<br />
content. After selecting the aux. you want to route to, simply hold shift and make<br />
the selection on the select bus.<br />
This is the fill output of media player 2, and is derived from the still or clips RGB<br />
content.<br />
This is the key output from media player 2, and is derived from the still or clips alpha<br />
content. After selecting the aux. you want to route to, simply hold shift and make<br />
the selection on the select bus.<br />
This is the switcher program out, and is the same as the main program SDI output<br />
on the switcher. After selecting the aux. you want to route to, simply hold the shift<br />
button and cut/fill button and then make the selection on the select bus.<br />
This is the preview output and shows the source selected on the preview bus, and<br />
is the same as the preview window in the multi view. After selecting the aux. you<br />
want to route to, simply hold the shift button and cut/fill button and then make the<br />
selection on the select bus.<br />
This is identical to the program output, however does not include any of the<br />
downstream keyer contents. It’s useful when you want to record a master output<br />
without logos or bugs on the downstream keyers. After selecting the aux. you<br />
want to route to, simply hold the shift button and cut/fill button and then make the<br />
selection on the select bus.<br />
This is the same as above, however this output is taken from between the two<br />
down stream keyers, and so includes down stream keyer 1, but not down stream<br />
keyer 2's output. After selecting the aux. you want to route to, simply hold the shift<br />
button and cut/fill button and then make the selection on the select bus.<br />
Using clean feeds on aux. outputs can allow you to output a local version of a live production with local<br />
broadcast branding from the down stream keyer, but then get a super-less version for International broadcast<br />
from the aux. output and clean feed. This is a very powerful feature!