Blackmagic ATEM Manual - Concept Music Art
Blackmagic ATEM Manual - Concept Music Art
Blackmagic ATEM Manual - Concept Music Art
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
65<br />
Operating Your <strong>ATEM</strong> Switcher<br />
<strong>Manual</strong> Transitions<br />
<strong>Manual</strong> transitions allow you to manually transition between program and preview sources using the fader<br />
bar in the transition control block. Mix, dip, wipe and DVE transitions can all be performed as a manual<br />
transition.<br />
To perform a manual transition on the software control panel or the broadcast panel<br />
Step 1. On the preview bus, select the video source that you want on the program output.<br />
Step 2. Select the transition type using the transition type buttons in the transition control block.<br />
Step 3. <strong>Manual</strong>ly move the fader bar from one end to the other to execute the transition.<br />
The next fader bar move will begin a new transition.<br />
Step 4. During the transition the red and green buttons on the program and preview buses both turn red<br />
to indicate that you are in the middle of a transition. On the broadcast panel, the fader bar indicator<br />
also displays the position and progress of the transition. On the software control panel, the virtual<br />
fader bar displays the position and progress of the transition.<br />
Step 5. At the end of the transition sources selected on the program and preview buses are exchanged<br />
to indicate that the video source that was on preview is now on program and vice versa.