F4200N Manual - Fisnar.fr
F4200N Manual - Fisnar.fr
F4200N Manual - Fisnar.fr
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>F4200N</strong> Operating <strong>Manual</strong><br />
Section 5: Point Type & Function Reference<br />
Part # 562187N<br />
Rev. C Jun 2011<br />
1.8 Dispense ON / OFF<br />
The Dispense ON / OFF instruction will allow the user to program an instruction which will<br />
turn the dispenser ON or OFF.<br />
This is useful for turning the dispenser OFF before the end of a line to prevent excess<br />
material at the line end.<br />
Problem: Too much material at the end of the line<br />
Solution: Turn the dispenser OFF before the end of the line<br />
Turn Dispenser Off here<br />
Continue moving to end of line<br />
To register a DISPENSE OFF instruction, jog the tip to the XYZ location where you want<br />
the dispenser OFF, enter that location as a Line Passing point, then press the ENTER key<br />
and select Dispense ON / OFF.<br />
Press 1 to select Dispenser ON, or press 2 to select Dispenser OFF.<br />
- Page 34 - © 2011 <strong>Fisnar</strong> Inc.
Change language