F4200N Manual - Fisnar.fr

F4200N Operating Manual
Section 5: Point Type & Function Reference
Part # 562187N
Rev. C Jun 2011
1.25 Dispense Output Setup
Dispense Output Setup assigns the dispense output port number (0-8) for the line and dot
under control of the line dispense setup and point dispense setup. The default dispense
output port number is zero.
Programming Sample:
Address
Instruction
1 Line Dispense Setup
Head Time: 0.1
Tail Time: 0.1
Node Time: 0
Tail Length: 0
2 Dispense Output: 3
3 Line Start
4 Line End
5 Line Dispense Setup
Head Time: 0.15
Tail Time: 0.1
Node Time: 0
Tail Length: 0
6 Dispense Output: 2
7 Line Start
8 Line End
9 Point Dispense Setup
Head time: 0.1
Tail time: 0.1
10 Dispense output: 1
11 Dispense Dot
12 Dispense Dot
End Program
- Page 52 - © 2011 Fisnar Inc.