LabChip GX/GXII User Manual

Software Reference 123Error Message AreaError messages are displayed below the Chip Status and RunStatus on the LabChip GX Main Window.Error messages can result from hardware or software problems.Most are the result of peaks not being located by the analysisalgorithms of the software. This can be due to a sample or ladderpeak not appearing as expected. The software settings (in the PeakFind Tab) can also cause peaks to be undetected, which can causeerrors. Additionally, manually excluding a peak (see page 64) fromanalysis (in the Peak Table View) or changing the start or end timesfor a run can cause errors with the peak find algorithm.See “Error Messages” on page 235 for a list of errors and tips onpreventing or resolving errors.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.