LabChip GX/GXII User Manual

Software Reference 205Run Tab (Continued)SamplesSelect the wells to be read during the assay. Selected wells areblue, cleared (not read) wells are white.• To select all wells on the plate, click the double-arrow button inthe lower-right corner of the plate.• To select all rows on the plate, click the double-arrow button atthe top left corner of the plate.• To select all columns on the plate, click the double-down-arrowbutton at the top right corner of the plate.• To select a column, click the column number at the top orbottom of the plate.• To select a row, click the row letter on the left or right side of theplate.• Clear specific wells by clicking on the selected well again.Sipping OrderSelect the order in which the wells will be sampled during the assay.• Select Row-wise to sample all wells in each row beforeproceeding to the next row (A1, A2, A3...).• Select Column-wise to sample all wells in each column beforeproceeding to the next column (A1, B1, C1...). Ladders aresipped every 12 wells, so some columns will include a ladder inthe middle of the column.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.