LabChip GX/GXII User Manual

Software Reference 130Graph View (Continued)Right-Click Menu (near a peak)Right-click above or below a peak in the graph to display a shortcutmenu containing the following commands:Exclude Peak - Excludes the peak from the analysis. (The PeakType label displays X.)Include Peak - Includes an excluded peak in the analysis. Onlyavailable when the selected peak is already excluded or is typeSystem Peak or “?”. Including the peak will compute the peakproperties, populate the peak table, and include the peak in thearea total used for the %Purity calculation.Force Lower Marker - Defines the selected peak as the LowerMarker. (The Peak Type label displays LM*.)Clear Forced Lower Marker - Allows the analysis to determine thelower marker. (The Peak Type label for the calculated lower markerdisplays LM.) Only available when the selected peak is a ForcedLower Marker.Force Upper Marker - (DNA Assays only) Defines the selectedpeak as the Upper Marker. (The Peak Type label displays UM*.)Clear Forced Upper Marker - (DNA Assays only) Allows theanalysis to determine the upper marker. (The Peak Type label forthe calculated upper marker displays UM.) Only available when theselected peak is a Forced Upper Marker.Add Expected Peak - Opens the Add New Expected Peak Windowto add a new Expected Peak to the specified wells.Force Expected Peak - Defines the selected peak as the specifiedExpected Fragment or Protein. A list of all of the defined ExpectedPeaks displays beside the shortcut menu. Select the desiredExpected Peak from the list.Clear Forced EP - Clears the forced peak and allows the analysisto determine the expected peak.Right-Click Menu (at the bottom of an RNA peak)Right-click near the bottom of a peak in the graph for an RNA assayto display a shortcut menu containing the following commands:Reset to Defaults - Sets the Peak Baseline endpoints back to thedefault values.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.