LabChip GX/GXII User Manual

Software Reference 142Peak Table View (Continued)To show only filtered peaks, sort within each well, or hide excludedpeaks, see Peak Table Properties.Protein and Glycan assays are only supported on LabChip GX IIinstruments. DNA and RNA assays are supported on LabChip GXand GX II instruments.The Peak Table can display the following columns:Well NumberThe number of the well in the same order as the wells wereselected in the collection. See Selecting the Wells in a Collection.Plate NumberThe number of the plate in the same order as the plates aredisplayed in the Plate View or Plate List.Plate NameThe name of the plate defined in the workspace.Plate FileThe name of the original plate data file. This name cannot bechanged.Instrument NameThe name of the instrument that was used to run the plate andcreate the data file.Date_TimeThe date and time that the plate data files was created.Well LabelThe row letter and column number of the well (A1 - H12 for 96-wellplates, or A1 - P24 for 384-well plates).Sample NameThe sample name defined in the Sample Name File selected in theAdvanced Tab on the Start Run Window. The Sample name canalso be changed in the Well Table View or the Gel View.Chip IDThe ID number of the Chip used to run the plate.BarcodeThe barcode on the plate used in the run.Peak IndexThe index number of the peaks in the sample. Marker peaks, peaksbefore the lower marker, and peaks after the upper marker are notnumbered.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.