LabChip GX/GXII User Manual

Software Reference 152Add Plate WindowUse the Add Plate window to add new plates to the system. To openthe Add Plate window, click the Add Plate button on the PlateInformation Window.Plate NameFigure 56. Add Plate WindowThe Add Plate window contains the following settings:Specifies the plate name that displays in the Start Run Window.Plate Type Specifies the number of wells in the plate, either 96 or 384.X Margin The distance from the outer edge of the plate to the center of well A1in the X direction.Y Margin The distance from the outer edge of the plate to the center of well A1in the Y direction.Plate Height The distance from the bottom of the plate to the top of the plate.Well Depth The distance from the top of the plate to the bottom of the well.Sip Height The distance from the bottom of the well to the bottom of the sipperwhen the sipper is positioned to sip sample from the well.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.