LabChip GX/GXII User Manual

Software Reference 218Define AccessUse the Define Access Tab to assign the desired rights to eachaccess level. These rights control the actions each user is permittedto perform in the LabChip GX software. The Define Access tab isnot available while an assay is running.Figure 101. User Administration Window - Define AccessThe Define Access tab displays a column for each access level(Administrator, Supervisor, Operator, Restricted User, and Service).Select Enabled for each right to be allowed for an access level, orselect Disabled for each right not allowed for an access level.The table below describes the function of each Access Right.Access RightUser AdministrationRun AssaySave Existing DataFileSave WorkspacePlate EditorFunctionIf enabled, allows access to the User Administration Windowto add and edit users, set access rights, and set policies.If enabled, allows users to run assays and save the new datafiles that are created by the run. Users are not permitted tosave changes to existing data files.If enabled, allows users to save changes to existing datafiles.If enabled, allows users to save new and existingworkspaces. If Save Existing Data Files is not selected,users can only save workspaces where the data files havenot changed.If enabled, allows users to add or edit plate dimensions in thePlate database.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.