LabChip GX/GXII User Manual

Data Analysis 75Adjust Pane WidthsThe LabChip GX Main Window displays several different views ofthe data files open in the workspace. You can change the heightand width of the views to make the views smaller or larger.To adjust panes:Show or Hide Views1 Place the cursor over the edge of the pane that you want toadjust. The cursor changes to a line with arrows on each end.2 Click and drag up, down, left, or right. The pane is resized afteryou release the mouse button. The layout setting is saved aspart of the collection.3 To save the setting, save the workspace. To create newcollections with the same settings, the collection can be savedas a collection template (see “Collection Menu” on page 117).The views displayed in the LabChip GX Main Window can behidden to maximize other views in the main window.To hide a view:1 Select Collection Layout on the LabChip GX Main window.The Layout Options Window opens.2 Click on the location that is selected for the view to clear theselection. The view is hidden.3 If a location (Left, Right, or Bottom) does not contain any views,the pane closes and the remaining panes enlarge to fill thespace.Note: The Gel View is always displayed and cannot be hidden.To display a hidden view:1 Select Collection Layout on the LabChip GX Main window.The Layout Options Window opens.2 Click on the desired location for the hidden view (Left, Right, orBottom). If multiple views are displayed in the same location,use the tabs at the top of the location to switch between views.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.