LabChip GX/GXII User Manual

Data Analysis 56Column E: The search window size for each Expected Peak incolumn D as a % (10 = +/-10% of Expected Peak size). If allExpected Peaks use the same window size, enter a single value;otherwise enter unique values as a semicolon separated list. Iffewer windows than EPs are entered, the last window applies to allremaining EPs in the list.Column F… Any higher columns are ignored.Applying Different Window Values to Expected Peaks of theSame Size in Different WellsOnly one Expected Peak of a particular size can exist in the assayanalysis settings. If the same Expected Peak size with a differentExpected Peak window is entered in the Sample Name window,only the first Expected Peak is created. All other Expected Peaks ofthe same size use the same window as the first Expected Peak. Toovercome this restriction, use Expected Peaks of slightly differentsizes; e.g. 200, 200.1, 200.2, etc. to apply different windows to thesame Expected Peak in different wells.Sample Name File Import ErrorsAny row in the .CSV file that does not match the expected formatand cannot be interpreted is ignored. If none of the rows can beinterpreted, usually because the first column does not contain thewell label, the following error message displays: “No rows foundmatching format: label, name, comment, EP, window.”P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.