LabChip GX/GXII User Manual

Operation 26Select the Auto Export SettingsThe Auto Export settings specify which views to automaticallyexport at the end of each run and specifies the format for each view.Click the Auto Export Settings button in the Output Tab on theStart Run Window to open the Export Window.To select the desired views to export:1 Select the check boxes next to the views to export. SelectingExport All selects all check boxes.2 For each selected view, to change the location for the files, clickthe Browse (...) button and select the desired location.3 If Raw Data is selected, click the AIA Format check box toexport in Chromatography Data Interchange Format or clear thecheck box to export in .CSV format. If .CSV is selected:• Select Include Size Data to align the data to the well'sladder (for one file per well) or to the first well (for a singledata file) and include the size data in the exported data.• Select Export Single Table to export the data for all wells inthe plate to one .CSV file. If not selected, the data from eachwell is exported to a separate .CSV file.4 If Gel is selected:abcSelect either Single File to include gels for all wells in therun in the same image file, or select Separate Files toexport each gel to a separate image file.To adjust the contrast minimum and maximum values for allgels to a specific lane in the gel, choose the desired well inthe Contrast Lane drop-down list. (Only available after thesample wells have been selected on the Run tab.)If desired, change the height, in pixels, of the exported gelgraphics in the Height text box.5 If either Electropherogram or Gel is selected, choose thedesired format for the image files.6 Click OK to save the Export settings. The specified files will beexported at the end of the run.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.