LabChip GX/GXII User Manual

Software Reference 207Output Tab (Continued)NOTEData files should be saved to a local folder on the computer's harddrive. Saving data files to a network drive may cause loss of data ifthe network connection is slow or interrupted.Create Daily Sub-Directory check boxIf selected, a new directory is created each day in the specifiedData Path, and all of the data files from that day are saved in thedirectory. The directory name is the current date, and the format isYYYY-MM-DD, where YYYY is the year, MM is the month, and DDis the day.Copy ToIf selected, the data file is copied to the specified folder after the runis complete.File PrefixSpecifies the text for the first characters of the data file name.Computer NameIf selected, adds the name of the LabChip GX computer to the datafile names.Project NameThe text is added to the data file names.Barcode check boxIf selected, the instrument reads the customer-supplied barcode onthe short (portrait) edge of the microplate and includes the barcodein the data file name.Date check boxIf selected, the current date is included in the data file name. Thedate format is YYYY-M-DD, where YYYY is the year, M is themonth, and DD is the day. The date is automatically added to thedata file name when the 21 CFR Part 11 option is installed.Time check boxIf selected, the time that the run was started is included in the datafile name. The time format is H-M-S, where H is the hour (0 to 24),M is the minutes, and S is the seconds. The time is automaticallyadded to the data file name when the 21 CFR Part 11 option isinstalled.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.