LabChip GX/GXII User Manual

Software Reference 197Run File Editor WindowUse the Run File Editor window to create run files (*.xml) for usewith Caliper's automation control software. When the LabChip GX isrunning in automation mode and is being controlled by softwaresuch as iLink Pro, you must create a run file to specify the settingsfor the assay that will be run. The run file contains all of the runsettings that would be specified in the Start Run Window. Run filescan also be imported into the Start Run window to start a run.To open the Run File Editor window, choose Tools Run FileEditor on the LabChip GX Main Window.Figure 85. Run File Editor WindowThe tabs on the Run File Editor contain the same options as thetabs on the Start Run window. See Start Run Window for definitionsof specific options or settings.The following buttons are located at the bottom of the Run FileEditor window:ButtonExportImportCloseDescriptionSaves the selected settings in a run file with the specified name (*.xml).Imports the settings from an existing run file (*.xml) into the Run FileEditor window.Closes the Run File Editor window without saving the settings.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.