LabChip GX/GXII User Manual

Software Reference 156Alignment Tab (Continued)Analysis Tab• Align Well Groups to Specified Ladders - If selected, eachrow is aligned with the ladder selected in the table.The Markers panel displays which markers are being used foralignment. This setting is determined by the assay type and cannotbe modified.To turn off alignment, select Turn Off Analysis from the Analysismenu.Use the Analysis tab on the Assay Analysis Window to view theUpper and/or Lower marker peak designation (this setting cannotbe changed) or to view or change the Ladder Sizes, LadderConcentration, Standard Curve (DNA only), Data Range, MarkerConcentration (DNA) Dilution Ratio (Protein), and System PeakExclusion (Protein). (Protein and Glycan assays are only supportedon LabChip GX II instruments.)Figure 59. Assay Analysis Window - Analysis TabLadder SizesA table showing the sizes (in base-pairs for DNA, kiloDaltons forprotein, and nt for RNA) of the ladder peaks. Click in the Sizecolumn and type the desired size to change the ladder size.Clear Default Ladder buttonDisplays at the bottom of the Ladder Sizes if a default ladder isdefined for the plate.Ladder ConcentrationThe concentration (in ng/uL) for the ladder peaks. (Not available forGlycan assays.)P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.