LabChip GX/GXII User Manual

Data Analysis 5810 To apply the expected peak only to specific wells, click in theApply to Wells column. The Select Wells window opens. Click(or click and drag) to select the wells that you want to apply theexpected peaks to, and then click the OK button.11 To apply the EFs, EPs, or EGs to the active plate, click theApply button.12 To apply the EFs, EPs, or EGs to all plates in the workspace,click the Apply Global button.Exporting EFs, EPs, or EGs1 After the EFs, EPs, or EGs are entered in the ExpectedFragments/Proteins/Glycans Tab, click the Export button at thebottom of the window. The Export ExpectedFragments/Proteins/Glycans Window opens.2 Navigate to the desired location for the file, type the desiredname for the file in the File Name text box, and then click theSave button. A .GEP file is created to save the expected peaksettings.Importing EFs, EPs, or EGsAfter an Expected Peak file (*.GEP) has been exported, you canimport the settings into another plate or workspace.3 With the plate open in a workspace, in the ExpectedFragments/Proteins/Glycans Tab, click the Import button at thebottom of the window. The Import ExpectedFragments/Proteins/Glycan Table window opens.4 Navigate to the location of the file, select the name of the file toimport, and then click the Open button. The expected peaksettings are imported into the tab.5 To apply the EFs, EPs, or EGs to the active plate, click theApply button.6 To apply the EFs, EPs, or EGs to all plates in the workspace,click the Apply Global button.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.