LabChip GX/GXII User Manual

Software Reference 153Assay Analysis WindowThe Assay Analysis window specifies the analysis parameters.These settings are used to display assay settings and change theanalysis and peak finding parameters to help resolve hard-todecipherdata. To open the Assay Analysis window, select Analysis Analysis Settings on the main menu.The Assay Analysis window contains the following tabs:• Assay Information Tab• Alignment Tab• Analysis Tab• Peak Find Tab• Expected Fragments/Proteins/Glycans Tab• Excluded Peaks Tab• Smear Analysis Tab• Titer Tab• Advanced TabThe following buttons at the bottom of the Assay Analysis windoware used to save, apply, or cancel changes:ButtonsApplyApplyGlobalExport AsAssayRestorePlateOKPrintPreviewPrintCancelFunctionApply setting changes and re-analyze the plate but keep the AssayAnalysis window open.Applies the selected analysis settings to all plates in the openworkspace.Opens the Export Assay Settings from Plate to Assay file window tospecify a name and location for a new assay file (*.asy). Clicking Savecreates a new assay file with the settings in the Assay Analysis Window.Restores the analysis settings for the plate to the settings selected inthe Restore Plate Settings window. If installed with CFR, opens theRestore Plate Settings To Version window to choose which version of adata file to restore.Apply changes in the Assay Analysis window and re-analyze the platewith these new settings.Opens the Print Preview window to view the analysis settings beforeprinting.Opens the Print window to print the analysis settings.Restores the settings that were selected when the window was openedor when the last Apply was performed. No re-analysis is performedbecause the settings were used for the last analysis performed.P/N 127170 Rev. 00 LabChip GX User Manual Caliper Life Sciences, Inc.