CSI-F-10 User manual - Hydac

GSM Radio Module CSI-F-10 Page 1009.7 Boolean Links9.7.1 NotThe Not function supplies the negated Boolean input value at itsBoolean output.If x = "0", then a "1" is output, otherwise a "0".Inputs: x: (Boolean)Outputs: y: (Boolean)Parameters: -9.7.2 AndThe And function links the two Boolean inputs with the "and"operation and supplies the result to its Boolean output.The output is then "1" only if both inputs are "1", otherwise it is "0".The following log table makes this function clear.x 1 x 2 y0 0 00 1 01 0 01 1 1Inputs: x 1 : (Boolean)x 2 : (Boolean)Outputs: y: (Boolean)Parameters: -9.7.3 Not - AndThe Not - And function links the two Boolean inputs with the "nand"operation and supplies the result to its Boolean output.The output is then "0" only if both inputs are "1", otherwise it is "1".The following log table makes this function clear.x 1 x 2 y0 0 10 1 11 0 11 1 0Inputs: x 1 : (Boolean)x 2 : (Boolean)Outputs: y: (Boolean)Parameters: -Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752