CSI-F-10 User manual - Hydac

GSM Radio Module CSI-F-10 Page 788.1.6 Extras• The following window opens when the function Options is selected:The selection buttons at the right-hand edge of the window appear after clickingin the respective selection field.- In the Language field, you can select either German, English or French as theCMWIN system language.- In the field Working folder you define the path for saving the CMWIN files(CM programs, recordings, constellation and configuration files, ...).- In the field Name as inscription you define whether or not the particularfunction name (e.g. Measured value 2, Action 4) is to be displayed as thefunction inscription in the "Linked functions" window.If "No" is selected, then you have the option of entering an inscription textmanually into the function parameters.- In the field Frame group you define whether or not a frame is to be shownaround generated groups in the CM program.- Clicking on OK applies the settings and returns you to the main CMWINwindow.Pressing Cancel takes you back without applying any changes.• By using the Reset Options function you can reset all the modified options andsettings to the standard settings.• Select the Display cycle time function to open the following window and todisplay the current cycle time of the CM program.Example:Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752