12.07.2015 Views

CSI-F-10 User manual - Hydac

CSI-F-10 User manual - Hydac

CSI-F-10 User manual - Hydac

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

GSM Radio Module <strong>CSI</strong>-F-<strong>10</strong> Page 185.3 Connection examples for sensorsWarning!The total length of the connected sensor cables (Sensor 1 + Sensor 2) may not exceedmax. 40 m. If this 40 m length is exceeded, there can be problems with the HSI signaltransmission.5.3.1 HYDACLab ® to Connection 1 and CS <strong>10</strong>00 to Connection 2In this case, only voltagesupply for CS <strong>10</strong>00!ZBE 38Voltage supply / HSIsee Chap. 6.3 to 6.68 pole, max. 30m5 pole, max. 30m5 pole, max. 30mA ZBE 26 BIn totalmax. 40mA ZBE 41 BHSI Address "a"HSI Address "b"Note!Connection "A" of the ZBE 26 (blue Y adaptor) must be sealed using the protective capprovided, to protect it from dirt and moisture!Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!