CSI-F-10 User manual - Hydac

More documents

Recommendations

Info

GSM Radio Module CSI-F-10 Page 11411 Specifications11.1 Power Supply- Input voltage: 10.5 ... 35.0 V DC- Residual ripple: ≤ 5 %- Current consumption without sensors and outputs:Typical (mean value): ≤ 90 mA Stand-By / ≤ 200 mA with radio connectionPulsed: ≤ 2 A (power supply recommendation: 3.5 A)- Reverse voltage protection: -35 V11.2 Sensor Inputs(5 pole female connection "Sensor 1", 8 pole female connection "Sensor 2")A maximum of 2 SMART sensors can be connected.- Output voltage (+U B out ): +U B in – 0.5V- Current supply: max. 500mA at 50°C11.3 Logic measurement channelsA total of up to 32 measurement channels can be processed by the CSI-F-10.A measurement channel can be a sub-channel of a SMART sensor or a value derived(calculated) from sensor data.11.4 Digital Inputs and Outputs (8 pole female connection "In/Out")- Output voltage (+U B out ): +U B in – 0.5 V- Current supply (incl. outputs): max. 500 mA at 50 °C- InputsQuantity: 4Input voltage:0 ... 35.0 V DCTrigger threshold:Low: < 0.8 V; High: > 5.0 VInput current consumption:approx. 4 mA- OutputsQuantity: 2Switching capacity (per output): + U B Out / 0.2 A11.5 InterfacesHSI busMobile radio network:AntennaSIM:GSM 850 / 900 (2W (EGSM))GSM 1800 / 1900 (1W (EGSM))50Ω FME plug3V SIM cardStatus 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
GSM Radio Module CSI-F-10 Page 11511.6 Cycle TimeThe CSI-F-10 identifies the required cycle time automatically when the program starts.The user has the option of having the current cycle time displayed on the CM Editor.The minimum cycle time amounts to 500 ms.11.7 Operating and Ambient ConditionsOperating temperature: -10.. .. +55 °C (GSM 1800 / 1900)-20 ... +55 °C (GSM 850 / 900)Storage temperature: -30 .. +65°CRelative humidity: 0 .. 70%, non-condensing11.8 Dimensions and Weight:Dimensions: approx. 145 x 95 x 55 mm (B x H x D) without antennaWeight:approx. 350 g11.9 Technical StandardsEMC: Conformity with R&TTE Directive 1999/5/EC, EN 61000-6-1/2/3/4Safety: EN 60950 / EN 61010Protection class: IP 6511.10 Items suppliedThe CSI-F-10 is packed in a box and is supplied ready-for-operation. Prior toinstallation, check the packaging and the device for transit damage and ensure that allthe parts are present.- CSI-F-10 (incl. 90° angle antenna and 2.5 m wire antenna)- User manual- CD-ROM with the PC software "CMWIN" as well as additional product information11.11 Maintenance and cleaning- De-energize the CSI-F-10 and verify that it is free of voltage.- For reasons of electrical safety, never clean the device with water or other fluids,and under no circumstances whatsoever should the device be immersed in water orother fluids.- Use only a dry, lint-free cloth for cleaning. Do not use any solvents, gasoline orsimilar, as these would damage the CSI-F-10.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
Page 1 and 2:
GSM Radio ModuleCSI-F-10User Manual
Page 3 and 4:
GSM Radio Module CSI-F-10 Page 3Tab
Page 5 and 6:
GSM Radio Module CSI-F-10 Page 59.2
Page 7 and 8:
GSM Radio Module CSI-F-10 Page 711.
Page 9 and 10:
GSM Radio Module CSI-F-10 Page 91 G
Page 11 and 12:
GSM Radio Module CSI-F-10 Page 112
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
GSM Radio Module CSI-F-10 Page 21Co
Page 23 and 24:
GSM Radio Module CSI-F-10 Page 23PI
Page 25 and 26:
+U BGNDGSM Radio Module CSI-F-10 Pa
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64: GSM Radio Module CSI-F-10 Page 637.
Page 67 and 68: GSM Radio Module CSI-F-10 Page 67
Page 113: GSM Radio Module CSI-F-10 Page 1131
Page 119 and 120: GSM Radio Module CSI-F-10 Page 119S
show all

CSI-F-10 User manual - Hydac

Create successful ePaper yourself

Delete template?

Save as template?