CSI-F-10 User manual - Hydac

GSM Radio Module CSI-F-10 Page 708.1 Menu BarThe menu bar of the CM Editor is tailored to the MS Windows user interface andcontains the following menu structure:8.1.1 File• With "New", you can establish for which platform (CM device) the CM programis to be created before starting to create the CM program. The programfunctions which are not available for the selected platform will be grayed out inthe Functions window and cannot be used during program generation.• With "Platform", you can establish for which platform (CM device) the CMprogram is to be created during the creation of a CM program. The programfunctions which are not available for the selected platform will be grayed out inthe Functions window and cannot be used during program generation.• Pressing "Open" allows you to open an already generated and stored CMprogram. CM programs have the file extension *.hecmp. Select the required filein the corresponding path.• Select "Save" to save a CM program. If the recording has not yet been saved,the “Save as…“ window will open. Enter the required file name in thecorresponding path.• To save a file that has not yet been saved or to save a file that has alreadybeen saved under a different name, select "Save as ...". Enter the required filename in the corresponding path.• To integrate an existing program that has already been saved into the currentprogram generation process, select "paste from file". Select the required file inthe corresponding path.• Press "Print" to print out the content of the Linked functions window(= program printout).• Press "Exit" to close the CM Editor.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752