CSI-F-10 User manual - Hydac

More documents

Recommendations

Info

GSM Radio Module CSI-F-10 Page 68• In CMWIN the following window is the last one to open. Click on Close to returnto the CM Manager.Afterwards, the CSI-F-10 reboots with the updated firmware. This breaks theconnection and this must be restored.Note!All settings, configurations, constellations and the CM program are retained and notoverwritten when the firmware is updated.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
GSM Radio Module CSI-F-10 Page 698 CM EditorThe CSI-F-10 GSM radio module processes its program in continuous cycles. Yougenerate the program with the CM Editor then load it into the device.The CM Editor is a constituent part of the HYDAC PC software CMWIN, Version 3 orhigher, and provides you with various tools and functions for designing, integrating andtesting your CM program.To open the Editor, proceed as follows:• Start the HYDAC PC software CMWIN• In the Extras Menu, select the "CM Editor" option.• The following screen opens:The menu structure and window properties of the Editor are explained below in greaterdetail:Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
Page 1 and 2:
GSM Radio ModuleCSI-F-10User Manual
Page 3 and 4:
GSM Radio Module CSI-F-10 Page 3Tab
Page 5 and 6:
GSM Radio Module CSI-F-10 Page 59.2
Page 7 and 8:
GSM Radio Module CSI-F-10 Page 711.
Page 9 and 10:
GSM Radio Module CSI-F-10 Page 91 G
Page 11 and 12:
GSM Radio Module CSI-F-10 Page 112
Page 13 and 14:
Page 15 and 16:
Page 17 and 18: GSM Radio Module CSI-F-10 Page 175.
Page 21 and 22: GSM Radio Module CSI-F-10 Page 21Co
Page 23 and 24: GSM Radio Module CSI-F-10 Page 23PI
Page 25 and 26: +U BGNDGSM Radio Module CSI-F-10 Pa
Page 27 and 28: GSM Radio Module CSI-F-10 Page 27
Page 67: GSM Radio Module CSI-F-10 Page 67
Page 119 and 120:
GSM Radio Module CSI-F-10 Page 119S
show all

CSI-F-10 User manual - Hydac

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?